Refractory Hex Mesh with Lances | Hexmetal Mesh

Hex Mesh with lances is a hexagonal cellular mesh grating with punched lances which is specifically designed for reinforcing both linings and flooring. It acts as a surface framework to hold cement or refractory in position, and relieves stress in the lining��s upper crust, which prevents spalling and cracking. As a result of hex metal��s strength and unique design, abrasion and corrosion are retarded and refractory life is significantly extended. Even hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal cellular grid.

Hexmesh with lances China Hexmetal mesh bonding hole pattern

Applications of Hexmesh

Since hexmesh��s flexibility allows it to be rolled, it easily conforms to circular shapes. It is ideal for lining ducts, furnaces, reactor vessels, cyclones, flue gas lines and other high temperature equipment of virtually any shape.

FOR REFRACTORIES

The flexibility, high strength and erosion resistant characteristics of Hexmesh make it an excellent choice for refractory linings in furnaces, reactors, cyclones, ducts and flues.

FOR FLOORS

Hexmesh provides long term protection for armor applications inside industrial floors. Specifically, loading docks, ramps, high traffic aisles for forklifts and trucks. Hot floors for foundries, forge shops and steel mills. Refuse and recycle disposal plant floors and almost anywhere floors are subject to severe impact and rolling loads. All will benefit with Hexmesh

Hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal honeycomb- shaped grid.

HESLY HexMesh Typical Service Temperature:

Anchorage Material		Chemical Composition								Typical Service Temperature
AISI	DIN	C%	Si%	Mn%	P%	S%	Cr%	Ni%	others	Typical Service Temperature
304	1.4301	��0.08	��1.00	��2.00	��0.45	��0.30	18.0��20.0	8.0��10.0	N	800��
316	1.4401/1.4436	��0.08	��0.75	��2.00	��0.45	��0.30	16.0��18.0	10.0��14.0	N:Mo	800��
321	1.4541	��0.08	��0.75	��2.00	��0.45	��0.30	17.0��19.0	9.0��12.0	Ti	800��
310S	1.4845	��0.08	��1.50	��2.00	��0.45	��0.30	24.0��26.0	19.0��22.0	��	1150��
Inconel 601	2.4851	��0.10	��0.50	��1.00	��	��0.15	21.0��25.0	58.0��63.0	Al:Cu	1200��
Inconel 800	1.4876	��0.10	��1.00	��1.50	��0.45	��0.15	19.0��23.0	30.0��35.0	Al:Ti	1200��
410S	1.4001	��0.08	��1.00	��1.00	��0.40	��0.30	11.5��13.5	��0.60	��	750��
CARBON STEEL		VARIOUS								550��

Hexmesh Ordinary Specifications:

HEX-MESH / HEXMETAL / HEXSTEEL
ITEM	SPECS		B	A	AF
1	1.2 X 10 X 50mm		1.2mm	10mm	40mm
2	1.2 X 15 X 50mm		1.2mm	15mm	50mm
3	1.2 X 20 X 50mm		1.2mm	20mm	50mm
4	1.5 X 10 X 50mm		1.5mm	10mm	50mm
5	1.5 X 15 X 50mm		1.5mm	15mm	50mm
6	1.5 X 20 X 50mm		1.5mm	20mm	50mm
7	1.8 X 15 X 50mm		1.8mm	15mm	50mm
8	1.8 X 20 X 50mm		1.8mm	20mm	50mm
9	1.8 X 25 X 50mm		1.8mm	25mm	50mm
10	2.0 X 15 X 50mm		2.0mm	15mm	50mm
11	2.0 X 20 X 50mm		2.0mm	20mm	50mm
12	2.0 X 25 X 50mm		2.0mm	25mm	50mm
13	2.0 X 30 X 50mm		2.0mm	30mm	50mm
14	2.0 X 30 X 80mm		2.0mm	30mm	80mm
Remark	A/F	Min: 40mm Max: 100mm
	MATERIAL	A3 ,0Cr13,1Cr13,SS304,SS316,1Cr18Ni9Ti, 310S, 410S